
www.vicon-security.com
Data/Spec Sheet
SurveyorVFT High-Performance PTZ Dome Series
• Coaxial video transmission, TCP/IP, ber and UTP video
transmission versions
• DIP-switch selectable competitive camera dome protocols
eliminate the need for external translators
• On-board memory retained in housing; designed for easy
installation and servicing
• 360° continuous rotation pan-and-tilt drive with a variety of
color domes available
• Color 22X, 22X with ExView
TM
, day/night 23X and 36X
camera options, maximum 432X optical/digital zoom
• EIS (image stabilizer) on 36X model
• High-resolution in 23X and 36X versions (540 TVL)
• Indoor or outdoor, ceiling or pendant congurations
• Digital Slow Shutter feature for enhanced low-light
applications
• Wide Dynamic Range (23X and 36X) provides best contrast
for high quality images
• Outdoor version provides environmental protection,
pressurized (PRS) and maximum security (M) versions
available
• Convenient integration into any existing CCTV matrix
system
• GUI provides conguration of all features
• 23X/36X version provides Digital Noise Reduction (DNR)
and enhanced sensitivity
• Enhanced autofocus
System Overview
SurveyorVFT Camera Dome System is a compact, lightweight and
intelligent security device comprised of a camera, pan/tilt drive,
receiver and CPU-based electronics all in an attractive and covert
enclosure. SurveyorVFT can be programmed and operated using any
Pilot or NOVA™ control systems and enhanced Vicoax®II protocol. It
is available in a variety of indoor and outdoor versions and can be
congured with a variety of camera and lower dome types. Refer to
Table 1.
The basic SurveyorVFT provides video transmission over coaxial cable.
Models are available that provide TCP/IP (ViconNet®), ber-optic and
twisted-pair (UTP) video transmission. Each of these options includes
an interface board that allows the specic type of video transmission.
An appropriate receiver is required.
The ViconNet provides support for network connection to Kollector
Digital Video Recorders and ViconNet Workstations via ViconNet
software. A pre-installed network interface board allows direct plug-in
to a system network switch. Video from the camera is available to all
network recorders and workstations for live view and recording.
The Vicon SurveyorVFT camera dome can be used in conjunction with
competitive PTZ drivers through DIP-switch selection.
There are four camera types available, each with NTSC and PAL
versions. The basic model is a 22X high-resolution camera/lens (CA in
the model number). Another 22X model is available with ExView™ CCD
technology (22XEX). The third version is a 23X day/night camera/lens
and the fourth is a 36X day/night camera/lens. The day/night models
feature wide dynamic range (WDR) and noise reduction (DNR/FNR).
See Technical Information and Table 3 for camera features.
Constructon and Installation
Vicon has a variety of hardware available to install the SurveyorVFT
in almost any environment. For indoor applications, an in-ceiling and
pendant style camera is offered; for outdoor installations, a pendant
conguration is available with a standard, pressurized, or high-impact
housing. The pressurized and impact-resistant versions of the lower
dome are constructed of impact-resistant, polycarbonate and are
secured by tamperproof screws. The outdoor units are provided with
a blower and thermostatically-controlled heater. Several mounting
accessories are available to t almost any installation need. Refer to
Table 1 for specic SurveyorVFT models and mounting options.
The SurveyorVFT is designed for easy snap-in installation. The drive
simply snaps into the housing. When removed, the housing retains all
programmed functions in its on-board memory. The customer interface
board snaps down for easy access and the PCB provides removable
terminal blocks for simple wiring connections. The SurveyorVFT has
one of the lowest current draws compared to other domes in its class.
.
.
Comentarios a estos manuales