
Quick Installation Guide
1) General controls
Live View Page Search & Playback Page Setup Page Help Page
The video drop-down list allows you to select a customized or pre-programmed
video stream on the live view page. Stream profiles are configured under Setup > Basic
Configuration > Video & Image. For more information, see “3.5.1 Basic Configuration > Video &
Image” of User’s Manual.
The resolution drop-down list allows you to select the most suitable video
resolutions to be displayed on live view page.
The protocol drop-down list allows you to select which combination of
protocols and methods to use depends on your viewing requirements and on the properties of
your network.
2) Control toolbar
The live viewer toolbar is available in the web browser page only. It displays the following
buttons:
The Stop but
ton stops the video stream being played. Pressing the key again toggles the
start and stop. The Start button connects to the encoder or start playing a video stream.
The Pause button pauses the video stream being played.
The Snapshot button takes a snapshot of the current image. The location where the
image is saved can be specified.
The Digital Zoom activates a zoom-in or zoom-out function for video image on the live
screen.
The Full Screen button causes the video image to fill the entire screen area. No other
windows will be visible. Press the 'Esc' button on the computer keyboard to cancel full
screen view.
The Manu
al Trigger button activates a pop-up window to manually start or stop the event.
The PTZ button activates a pop-up window for Pan, Tilt and Zoom control.
Use the Spe
aker icon scale to control the volume of the speakers.
Use the Microphone icon scale to control the volume of the microphone.
Use the slider icon scale to control the volume of the speakers and microphones.
3) Pan/Tilt/Zoom Controls
If the Video Encoder has been appropriately configured, the Live View page displays the controls
available for the installed Pan/Tilt/Zoom (PTZ) device. The administrator can enable/disable the
controls for specified users.
For more information, see “3.6 PTZ Control” of User’s Manual.
8
Comentarios a estos manuales