MP-955IR
IP IR Megapixel Camera
• Up to 1.3 megapixel resolution IP camera
(SXGA 1280x1024 pixels)
• Compatible with ViconNet Version 5 software
• Transmits high quality video across the LAN
and WAN for remote viewing and recording
on ViconNet NVRs, DVRs and Workstations
• Uses MPEG-4/M-JPEG compression that
optimizes file size and maximizes picture
quality
• Power over Ethernet (PoE) eliminates the
need for separate power supply
• A range of fps available depending on
resolution
• Supports Multicast
• Multi-stream with variable frame rate in the
same compression
• Remote configuration across the network
• Password protection for configuration
• Provides IR illumination with 24 IR LEDs,
allowing functionality in low-light situations
• Camera features electronic iris, BLC, AGC,
white balance, flickerless
• Integral 3.3-12 mm/F1.6 megapixel lens
• IP 66 weatherproof bullet shape housing
The MP-955IR I-Onyx® Megapixel IP IR Camera is a powerful
IP video source for a complete digital video management
system based on ViconNet® version 5 software. The camera is
fully compatible with all ViconNet systems and is remotely
managed and controlled from ViconNet workstations and
Kollector® Elite recorders. The camera delivers high-quality
video across the network.
Equipped with a 100 Mbps LAN interface board, the camera
allows direct plug-in to a network switch. Images received from
the IP camera can be displayed, recorded or archived like any
other ViconNet video component using the ViconNet
management software.
Megapixel cameras provide higher resolution, which results in
images with more detail and clarity. They also offer the ability to
cover a larger area while maintaining the detail in the image.
This provides the capability to digitally zoom further into the live
or the recorded video without losing focus and pixelating.
The cameras support either Multicast or Unicast and allows
networks that support multicast to take advantage of this
feature. Multistream support allows viewing and recording
video at different frame rates (fps) at the same compression
(MPEG-4 or M-JPEG).
The MP-955IR is a 1/3-inch format camera with a progressive
scan CMOS image device. It has 1280 x 1024 effective pixels.
It has a maximum resolution of SXGA (1280 x 1024) with an
image frame rate of 8 fps (lower resolutions provide higher fps).
The camera offers a selectable compression type of MPEG-4
or M-JPEG.
With IR OFF, the camera has a sensitivity 0.0046 fc (0.05 lux)
in B/W mode and 0.046 fc (0.5 lux) in color mode, at F1.8,
30 IRE, max AGC. The camera automatically switches from
color mode to black-and-white mode under 0.37 fc (4 lux). With
the IR ON, sensitivity is 0 fc (0 lux). Additionally, the MP-955IR
provides 24 IR LEDs to illuminate up to 66 ft (20 m) at 30 IRE.
The MP-955IR camera includes a 3.3-12 mm/f16 megapixel
varifocal lens. All connectors are conveniently located on the
rear panel. Synchronization is internal. Camera may be
powered by either PoE or a 12 VDC power input.
The camera is housed in a weatherproof IP66 rated bullet
shaped housing with sunshield for outdoor use. A wall mount is
available, model MP-955IR-WM.
The MP-955IR camera complies with radiation requirements fo
an FCC Class A device and CE.
1
Product Specification
ASSOCIATED EQUIPMENT AND ACCESSORIES
MP-955IR-WM Wall Mount: Product Code 9607-22: Mount
designed specifically for wall mounting the MP-955-IR.
ViconNet VN-WS-SW Software: Full capability maste
workstation software package, except the recording function,
for a PC for use with Kollector recorders; registration required
for use. Product Specification V113-09.
ViconNet VN-NVR-SW Software/VN-NVR Maste
Workstation: ViconNet master workstation software package
(primarily for recording function)/PC preloaded with Maste
Control Software for use with Kollector recorders; registration
required for use. Product Specification V113-20.
Kollector Family of Digital Video Recorders, Product Code
varies by model: 16-channel networked digital
video
r
ecorders. Includes the Kollector Elite, Kollector Pro and
Kollector Lite series. Product Specification V112, V128 and
V185 respectively.
NETSWITCH-16, Product Code 8495-00: 16-port network
switch, includes 10/100Mbps ports, desktop/wall mount,
120 VAC. Product Specification 161.
NETSWITCH-24, Product Code 8495-10: 24-port network
switch, includes 10/100/1000Mbps ports, rack mount,
120 VAC. Product Specification 162.
NETSWITCH-24POE Network Switch, Product Code
8495-20: 16-port, 10/100/1000 autosensing network switch
with a choice of 24 VAC or PoE power source, stackable.
Product Specification V162-20.
Uninterruptible Power Supplies: 725 and 1000 VA units with
DB9 (RS-232) and USB ports; 120 VAC input/output.
Product
Specification V147.
Vicon part number 8009-7194-11-01
ViconNet, Kollector , I-Onyx and their logos are registered trademarks of Vicon Industries Inc.
Product specifications subject to change without notice.
Model No:
9607-20
SEC: 3
SPEC:
V194-11
REV: 1009
Product Code
MP-955IR
(256 paginas)
(67 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales