Vicon V992D-N4 Guía de instalación

www.vicon-security.com XX248-10-01V992D-N4 Network Dome CameraVicon Industries Inc. does not warrant tha

8 3. Live View Digital Zoom Snap Shot Full Screen Video Stream change: First stream  Second stream Play: Click this button by manuall

9 • Multicasting is bandwidth-conserving technology that reduces bandwidth usage by simultaneously delivering a single stream of information to multi

10 4. Setup The V992D-N4 is configured from the Setup link, which is available on the top left hand side in the web interface. This configuration

11 4.2 Video The following descriptions show examples of some of the features available with V992D-N4. 4.2.1 Codec This section allows you to

12 Size Video output resolution. See the output resolution table that follows. Frame rate 1 ~ 30fps (60Hz) / 1 ~25fps (50Hz) GOP Size 1 ~ 6

13 < Output resolution and Frame rate table for V992D-N4 > (Unit: fps) RESOLUTION Table Second Stream 720p 4CIF 4CIF* VGA 4:3 VGA 16:9

14 MANUAL: Use this setting to control camera exposure manually. To compensate for poor lighting conditions, you can adjust the Color level, Brightne

15 4.3 Live V992D-N4 can support up to 10 simultaneous users via unicast. 4.3.1 Viewer Setup Live View Protocol RTP Unicast (UDP) / RTP o

16 4.4.FTP 4.4.1 Config Server Configuration Allows transmission of still images to remote sites using the FTP server. Set the information

17 Directory The name of the directory where the still images will be stored when an Event occurs. File Prefix You may add a file name prefix t

Contents 1. PRODUCT FEATURES ...

18 Interval It allows for saving still images based on frequency (1 image every 10 sec, for example). Use the drop-down control to set from 10 se

19 NOTE: Using the motion detection feature will consume more of the cameras resources, and this could decrease the camera’s overall performance, de

20 NOTE: IP address assignment via DHCP may lead to the situation where the IP address changes and you lose contact with the camera. If your DHCP ser

21 3) Select the “Change IP Address” button. The message “Do you want to change IP address?” will display; select “Yes” from the pop-up window. 4

22 4.6.3 E-mail You must turn Notification to ‘On’ and then enter the host names or addresses for your mail servers in the fields provided to enab

23 4.7.1 User When you access the camera, the Configure Root Password dialog box appears. Enter the default user name ADMIN and password 1234 to lo

24 4.7.3 Maintenance System Name Choose a system name to identify the camera when using e-mail notifications. System Reboot Reboots the camera

25 Firmware Update Procedure 1. Save the firmware file to your computer. 2. Go to Setup > System > Maintenance within the camera web browse

26 4.7.4 Information System Information Confirm the system information of the camera: S/W version/Model Name/MAC address/IP address settings.

27 5. Dimensions

1 1. Product Features The V992D-N4 is a high performance H.264 network camera dome, designed for demanding security installations. It delivers crisp

28

29

30 Shipping Instructions Use the following procedure when returning a unit to the factory: 1. Call or write Vicon for a Return Authorization (R.A

31 Vicon Standard Equipment Warranty Vicon Industries Inc. (the “Company”) warrants your equipment to be free from defects in material and workmans

Vicon Industries Inc. Corporate Headquarters 89 Arkay Drive Hauppauge, New York 11788 631-952-2288 800-645-9116 Fax: 631-951-2288 Vic

2 3. Status LED LED Color Indication System Status Network Blue On Power On. Flash Network is active Status Red Flash Firmware Upload in prog

3 2. Installation 2.1 Installation Preparation 1) Remove Dome Cover - Loosen two Hexlobe (T20) screws with supplied L-key wrench and remove dome

4 3) Mounting to a ceiling/wall 3-1) CEILING FLUSH MOUNT Remove bottom plate. 3-2) SURFACE MOUNT 4

5 2.2 Assign IP address The default setting of the camera is set “DHCP” to ON. If you have a DHCP server on your network and UPnP function enabled o

6 2.3 Access from a browser 1. Start a browser (i.e., Internet Explorer) 2. Enter the IP address or host name of the camera in the Location/Address

7 NOTE: The layout of the live view page in the camera may have been customized to meet specific requirements. Consequently, some of the examples an