Vicon AurorA2000 Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 9
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
ELECTRICAL
Input Voltage: Universal 100-240 VAC, 47-63 Hz.
Current: 600 mA @120 VAC.
350 mA @ 230 VAC.
Power Dissipation: 100 watts nominal.
Heat Equivalent: 5.7 btu/min (1.4 kg-cal/min) maximum.
Note: These figures represent the
conversion of 100% of the electrical
energy to heat. Actual percentage of
the heat generated will be less and
will vary from product to product.
These figures are provided as an aid
in determining the extent of cooling
required for an installation.
Fuses: 1.25 A, 250 VAC, slo-blo type located
in power socket for 120 VAC units.
0.63 A, 250 VAC, slo-blo type located
in power socket for 230 VAC units.
6 A, 32 VAC, 3 AG in-line type locat-
ed inside near the front panel.
Radio Frequency
Emission Rating: FCC Class B and EN55022.
RECORDING/PLAYBACK/ARCHIVING
Recording Rate: System rate can be set to 1 - 15 and
maximum (approximately 25) frames
per second (fps).
Note: The system-recording rate
must be divided among the total
number of system cameras to obtain
an approximate per camera frame
rate.
Recording Time: Approximately 7 days of recording
onto a 40 GB hard drive with normal
quality/sensitivity settings and 12 fps
system recording rate with approxi-
mately 8 hours per day of activity
independent of the number of active
camera channels.
Recording Quality: 5 settings: Highest, High, Normal,
Low and Lowest.
Recording Sensitivity: 5 settings: Highest, High, Normal, low
and lowest.
Recording Capacity: 4 configurations; 40, 80 120 and
160 GB.
Playback Control: JOG/Shuttle front panel concentric
knob allows control of video playback
speed and direction.
Recording
Management: Utility provided to erase data on hard
drive.
Playback Capability: 16 channels of recorded video may
be played back simultaneously with a
single synchronous audio channel.
Archiving Capability: All 16 channels of recorded video,
one audio channel and alarm/
time/titling information may be
archived to the optional internal
CD-R/W drive in a proprietary format.
The CD-R/CD-R/W disks may only
be played back on AurorAcorD. One
selected video channel may be
exported to the internal floppy disk
drive in a AVI format. The floppy disks
may be played back on AurorAcorD
or on a PC Pentium grade computer
utilizing the provided wavelet-codec
driver installation program and
Windows Media Player.
VIDEO
Video System: NTSC: RS-170, 525 lines, 30
frames/sec.
PAL: 625 lines, 25 frames/sec.
Video Input Signal: Composite video: 1.0 V p-p (140
IRE), consisting of 714 mV (100 IRE)
of luminance and 286 mV (40 IRE) of
negative-going sync.
Y/C input: 1.0 V p-p Y signal (Y = luminance) plus
400 mV C signal (C = chominance or
color) over separate conductors.
Video Output Signal: 1.0 V p-p (140 IRE) composite video,
consisting of 714 mV (100 IRE) of
luminance and 286 mV (40 IRE) of
negative-going sync.
Y/C output: 1.0 V p-p Y signal (Y = luminance) plus
400 mV C signal (C = chominance or
color) over separate conductors.
Horizontal Resolution: NTSC VGA: 720 pixels, 540 lines.
BNC: 640 pixels, 480 TV lines.
PAL: 640 pixels, 480 TV lines.
Video Crosstalk: Less than 50 dB at 4.2 MHz.
Video Inputs: 16, terminated with 75 ohms.
Looping
Video Outputs: 1 looping output for each camera
input using provided cable assemblies.
Monitor Outputs: 2 monitor outputs for digitally
processed video, 1 BNC, 1 VGA (for
multiscreen displays, video special
effects, etc.). 1 monitor output for
unprocessed analog video. Provides
sequential switching, hold viewing of
selected cameras and time, date,
titling.
VIDEO FUNCTIONS
Multiscreen Displays: Refer to Figure 1.
Input Channel
Distribution: Any video input channel may be
assigned to any segment of a multi-
screen display.
Multiscreen
Sequencing: Any segment or segments of a multi-
screen display may be assigned to
sequence a series of different input
videos. Dwell is user-selectable.
Electronic Zoom: Linear 16 zoom range with interpo-
lation to minimize blocking and
pixellation.
Electronic
Pan and Tilt: The zoomed area can be moved
around to any part of the original
full-screen image.
Technical Information
6
Model No: Product Code:
Refer to Table 1 Refer to Table 1
SPEC: V091 REV: 402
Vicon Product Facts
SEC: 4
Vista de pagina 5
1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios