
vicon-security.com
2
vicon-security.com
2
SURVEYORVFT SPECIFICATIONS
Electrical
Input Voltage:
18-30 VAC. (Will operate within spec on
voltages up to 32 VAC. For voltages between
30-32 VAC, use a Class 3 indoor/dry or
outdoor/wet power supply.)
Maximum Operating
Distances:
Refer to Table.
Power
Consumption:
Indoor: Coax/Fiber/UTP: 24 W maximum;
Outdoor: Coax/Fiber/UTP: 50 W maximum;
Fuse:
F1: 5x20 mm, 1.6 A 250 VAC slo-blo.
F2: 5x20 mm, 2.5 A 250 VAC slo-blo.
Connector Types:
Video Out: See version type.
Power: 2-position removable screw terminal
block.
Control Input/Output: See version type.
Relay Output: See version type.
Alarm Input: 8-position removable screw
terminal block.
Video Output Impedance:
75 ohms.
Certifications:
CE; FCC Class A.
International Protection (IP) Ratings:
Outdoor/Impact-Resistant: IP66.
Pressurized: IP67
Indoor Pendant: IP62.
In-Ceiling: IP51.
NEMA.
Operational
Autotour
Capabilities:
2 autotours available with 256 pan, tilt and
zoom functions per autotour. Programming
is done in real time with joystick and push
buttons. Not available in 22x version.
Sectoring:
16 maximum, programmable for size and
titling. Sectors have the capability to be
blanked out. Not available in 22x version.
Alarm
Capabilities:
4 alarm inputs, individually programmable.
Functional state enable/disable. Report state
(report on/off). Active state (high/low). Mode
(manual, momentary or automatic) with
programmable dwell time control. Set and
reset action (preset solve, relay on/off, tour,
autotour). Alarm titling.
Alarm Output:
1 relay, momentary or latching. Power-on
state denition (on/off).
Relay function status titling.
Resistive Load: 0.3A @125 VAC;
1.5A @ 30 VDC.
Inductive Load: 0.15A @125 VAC;
0.75A @ 30 VDC.
Control Display:
On-screen, menu-driven system allowing full
conguration of the dome.
Privacy Masks:
16 programmable, zoom-scalable. Not
available in 22x version. Not available in 22x.
Scheduling:
Real-time clock allows scheduling of up to 64
events, including presets, relays, alarms, tours
or autotours.
Multi-Language Menu:
English, Spanish, French, Italian and
German.
Camera Features:
6 motion detection zones with 3 sensitivity
levels; image freeze during preset solve; ip
(invert) image.
Screen Titling
Capabilities:
Programmable On/Off for camera, preset,
sector, relay and alarms; date/time enable/
disable.
Compass/azimuth, 8 compass headings
(N, NE, E, SE, S, SW, W, NW).
20 characters maximum; selectable position.
Three text sizes for top 2 lines. 20 characters.
Fade capability.
Auto Baud:
Auto baud detection in RS-422/ RS-485 mode;
4800, 9600, 19,200 bps baud rates supported.
Absolute Position Control:
Available in RS-422/RS-485 mode.
Pan/tilt: 0.125°; zoom: 0.125X.
Competitive Protocols:
DIP switch selectable.
Control Protocol
Hardware:
Vicon control system or keypad.
NTCIP: 1103 compatible hardware.
Data Sheet Number: V134-07
Dated: 11/2014
Vicon Data Sheet Part Number: 8009-7134-07-00
Specications subject to change without notice.
Vicon, Surveyor, and their logos are registered trademarks of Vicon Industries Inc.
ExView is a trademark of Sony Corporation.
Copyright © 2014 Vicon Industries Inc. All rights reserved.
Drive Type:
Electrical motorized pan and tilt
with
electronic control.
Pan View:
360°.
Tilt View:
-2.5 to 92.5°.
Pan Speed:
Variable, 0.1 to 360°/sec (120°/
sec in 22X).
Autopan Speed:
Variable, 0.1 to 42°/sec; enable/
disable.
Tilt Speed:
Variable, 0.1 to 150°/sec
(90°/sec in 22X).
Zoom/Focus Speed:
Less than 1.8 sec, tele to wide.
Preset Capability:
79 individually programmable.
Preset Solving Speed:
1 second nominal.
Preset Accuracy
(Pan and Tilt):
0.1° maximum.
Tour Capabilities:
8 tours (22X, 4 tours). 32
programmable events per tour.
Events may be preset positions
with speed control, alarm
acknowledge, dwell time control,
relay control, call autotours, tour
repeat or another tour, save/recall
camera status.
Camera/Lens
Day/night cameras (NTSC/PAL) in a variety of zoom and feature
capabilities. Refer to Table 3 for complete specications.
Comentarios a estos manuales