Vicon XX247-20-04 Especificaciones descargar pdf (Pagina 7)

Quick Installation Guide

2.4 Network Connection and IP assignment

The network camera is designed for use on an Ethernet network and requires an IP address for access.

Most networks today have a DHCP server that automatically assigns IP addresses to connected

devices. By the factory default, your camera is set to obtain the IP address automatically via DHCP

server. If your network does not have a DHCP server the network camera will use 192.168.1.100 as

the default IP address.

If DHCP is enabled and the product cannot be accessed, run the “Smart Manager” utility on the CD to

search and allocate an IP address to your products, or reset the product to the factory default settings

and then perform the installation again.

1. Connect the Network Camera/device to the network and power up.

2. Start SmartManager utility (All programs > NautilusClient16 > SmartManager); the main window

will display. After a short while any network devices connected to the network will display in the

list.

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Vicon XX247-20-04 Especificaciones Pagina 7