Vicon CE102D Guía de instalación descargar pdf (Pagina 52)

• DSCP Settings

For each type of network traffic supported by your network video product, enter a DSCP

(Differentiated Services Code Point) value. This value is used to mark the traffic’s IP header.

When the marked traffic reaches a network router or switch, the DSCP value in the IP header

tells the router or switch which type of treatment to apply to this type of traffic, for example, how

much bandwidth to reserve for it. Note that DSCP values can be entered in decimal or hex form,

but saved values are always shown in decimal.

The following types of traffic are marked:

- Live Stream DSCP

- Event/Alarm DSCP

- Management DSCP

• Automatic Traffic Control

Check the box to enable automatic traffic control.

Set a limitation on user network resources by designating the maximum bandwidth. Select either

the Maximum bandwidth or Automatic frame rate radio button.

- Maximum bandwidth: When sharing other network programs or equipment, it is

possible to set a limitation on the maximum bandwidth in the unit of Mbit/s or kbit/s.

- Auto frame rate: Selected if not influenced by a network-related program or equipment

without a limitation on the network bandwidth.

When the settings are complete, click Save, or click Reset to revert to previously saved settings.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 70 71

Sin comentarios

Vicon CE102D Guía de instalación Pagina 52