Vicon CE202D-N Guía de instalación descargar pdf (Pagina 25)

 AE & AWB

• Exposure control

This page provides access to set the exposure and white balance of the network camera.

Configure the exposure settings to suit the image quality requirements in relation to lighting

considerations.

- Mode: Supports exposure modes to control the amount of light detected by the camera

sensor based on settings for light conditions. The default setting is Auto.

* Automatic: Automatically sets the amount of light detected by the image sensor.

* Hold Current: Fixes the exposure at its current state.

- Value: Select a value in the drop-down list to tune the exposure. The default setting is 5.

- AGC: Select a value in the drop-down list to specify the level according to the screen

luminance. The default setting is 30dB.

- Enable Backlight Compensation: Set this checkbox to activate the BLC operation.

- Enable Flicker free: Set this checkbox to activate the flicker free operation.

- Flicker Mode - Provides the options for flicker.

* 50Hz: Select at 50 Hz environments.

* 60Hz: Select at 60 Hz environments.

- Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera.

* Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/15.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 73 74

Sin comentarios

Vicon CE202D-N Guía de instalación Pagina 25