Vicon CE202D-N Guía de instalación descargar pdf (Pagina 51)

* Default router: Specify the IP address of the default router (gateway) used for connecting

devices attached to different networks and network segments.

• IPv6 Address Configuration

Check this box to enable IPv6. Other settings for IPv6 are configured in the network router.

• DNS Configuration

DNS (Domain Name Service) provides the translation of host names to IP addresses on

your network. Check the radio button to obtain DNS server via DHCP or set the DNS server.

- Obtain DNS Server via DHCP: Automatically use the DNS server settings provided by

the DHCP server.

- Use the following DNS server address to enter the desired DNS server by specifying the

following:

* Domain name: Enter the domain(s) to search for the host name used by the network

camera. Multiple domains can be separated by semicolons (;). The host name is always the

first part of a Fully Qualified Domain Name, for example, myserver is the host name in the

Fully Qualified Domain Name myserver.mycompany.com where mycompany.com is the

Domain name.

* DNS servers: Enter the IP addresses of the primary and secondary DNS servers.

• Host Name Configuration

- Host Name – Enter the host name to be used as device information in the client software or

SmartManager. This is the camera name that will show up in the Site List in ViconNet.

• Services

- HTTP port: Enter a port to receive a service through the HTTP. Default port number is

‘80’.

- HTTPS port: Enter a port to receive a service through the HTTPS. Default port number is

‘443’.

- RTSP port: Enter a port to receive a service through the RTSP. Default port number is

‘554’.

• ARP/Ping Setting

- Enable ARP/Ping setting: The IP address can be set using the ARP/Ping method,

which associates the unit's MAC address with an IP address. Check this box to enable the

service.

Leave disabled to prevent unintentional resetting of the IP address.

When the settings are complete, click Save, or click Reset to revert to previously saved settings.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 73 74

Sin comentarios

Vicon CE202D-N Guía de instalación Pagina 51