Model Number Product Code Description
SVFT-UWM 8352 Wall mount, indoor/outdoor
SVFT-UCM 8351 Ceiling mount, indoor/outdoor
SVFT-UPM 8348 Parapet mount, outdoor
SVFT-URM 8349 Roof mount, outdoor
SVFT-UCP 8373 Ceiling panel, indoor
SVFT-WM 8350 Wall mount, short, indoor/outdoor
SVFT-IC-MKT 8374 In-ceiling mount kit, indoor
Model Number Product Code Description
S28PS 7029 28 VAC output, 2.5 amps, for indoor SurveyorVFT Camera Domes
S28WPS 7030 28 VAC output, 4 amps, for outdoor SurveyorVFT Camera Domes
S28PS-HD 7862 Heavy-duty single-channel for SurveyorVFT pressurized and outdoor impact-resistant camera domes
V284-175PS 6421 Four channel, 120 VAC input, 28 VAC output, 7.25 amps (total)
V288-360PS 6422 Eight channel, 120 VAC input, 28 VAC output, 13 amps (total)
V2816-720PS 6423 Sixteen channel, 120 VAC input, 28 VAC output, 26 amps (total)
TECHNICAL SPECIFICATIONS SECURITY SYSTEM
DIVISION 13 - SPECIAL CONSTRUCTION
SECTION 137_ _ - SECURITY CCTV SYSTEM
PART 2 - PRODUCTS
2.01 GENERAL
A. All equipment and materials used shall be standard components, regularly manufactured, regularly utilized
in the manufacturer’s system.
B. All systems and components shall have been thoroughly tested and proven in actual use.
C. All systems and components shall be provided with the availability of a toll free 24-hour technical suppor
phone number from the manufacturer. The phone number shall allow for immediate technical assistance
for either the dealer/installer or the end user at no charge.
D. All systems and components shall be provided with an explicit manufacturer warranty.
2.01 COMPACT CAMERA DOME SYSTEM
A. The motorized dome shall have internal CPU-circuitry and provision for external programming via
standard RS-422/485 protocol or enhanced VicoaxII protocol. Options for TCP/IP, fiber optic and twisted
pair (UTP) video transmission shall be available. This circuitry shall provide for an external power supply
input, four alarm inputs, one relay output and communications wiring.
B. Alarm inputs shall be individually programmable for their functional state (enabled or disabled), reporting
state (report on or off), active state (high or low), acknowledge mode (manual, momentary or automatic),
automatic acknowledge dwell time control, set and reset action (action when triggered or reset) and
displayed title text. The relay output shall be programmable for its power-on state (on or off), output type
(momentary or latching) and displayed title text.
C. Programmable titling shall be provided for the camera and every preset position, alarm, relay, and sector.
Titles shall be enabled or disabled individually or globally. The overall position of the titles and display
frame position shall be programmable. The capability to fade titles after a programmable time shall be
provided.
Table 1
cont’d
: Surve
orVFT Mountin
O
tions
Table 1
cont’d
: Surve
orVFT Power Su
lies
Product Specification
Model No:
SurveyorVFT
Product Code: See
Table 1
SEC: 3 SPEC: V134 REV: 1203
Contractors’ Specification
3
(12 paginas)
(112 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales