Vicon I-Onyx MP-955DN Especificaciones descargar pdf (Pagina 123)

114 • Configuring the ViconNet System XX112-36-00 Rev 909 Kollector Hybrid Network Digital Video Recorder

Column Description

Camera Name

The camera for which the FPS is being defined.

DSP

The DSP to which the camera is assigned.

The number of DSPs depends on the type of Kollector, 120-480 FPS. Each DSP has a maximum of

30 fps, depending on resources; if, for example, the site is a Kollector with 120 FPS, it offers DSPs

1-4. Select the required DSP. The system will prevent adding too many cameras to a DSP (in this

case 4 as 4x30 =120).

FPS

The number of FPS of the camera.

In manual FPS configuration, a camera can also be disabled by selecting disable from the drop

down list in this column. If a user tries to record with the disabled camera, or open it live, the

following notification is displayed.

Use

Remainder

If selected, the system will automatically use all the remaining FPS for the specified DSP (default =

selected).

Automatic FPS

When configuring macro recording, auto recording and pre/post alarms in their respective windows

(meaning, all windows that configure cameras for recording), the cameras are distributed to the DSPs and

are automatically assigned FPS, according to a preset algorithm (meaning that you do not control the

distribution of the FPS to the DSPs).

NOTES:

If the FPS configuration is set to Auto FPS, the FPS obtained for a camera may be different to that which

was specified in a specific window (see above examples).

In the Auto Record window, the camera assignment to DSPs is cyclic, meaning camera 1 goes to DSP 1,

camera 2 to DSP 2, camera 3 to DSP 3 and so on.

Example

If the site is a Kollector with 120 FPS, there will be 4 DSPs and each one will have 30 FPS. The cameras

will be distributed evenly between the DSPs.

To select automatic FPS configuration:

1. From the ViconNet Main window, click . The Setup Site Selection window is displayed,

showing a list of all currently connected transmitters and Workstations, as shown on page 59.

2. Select the Kollector for which you want to configure automatic recording and click

. The

System Settings window is displayed, as shown on page 60.

3. Click

. The Auto/Manual FPS window is displayed.

4. Select the Auto FPS checkbox.

5. Click OK.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 316 317

Sin comentarios

Vicon I-Onyx MP-955DN Especificaciones Pagina 123