Vicon I-Onyx MP-955DN Especificaciones descargar pdf (Pagina 137)

128 • Configuring the ViconNet System XX112-36-00 Rev 909 Kollector Hybrid Network Digital Video Recorder

16. Click to close the Macro Editor window. The System Settings window is

redisplayed.

All macros that you define(d) are available during alarm setup, as described in the following sections:

• Defining Alarm Setup Links, page 140.

• Creating Schedules, page 166 (via the Scheduler Settings window).

• Manual macro selection, as described in Chapter 7, Managing Macros and Schedules.

Macro Commands

The following is a list of the commands (actions) available to be triggered by a macro, including a

description of the settings to be configured for each command:

Command Setting Description

Select devices -OR-

Click Push to insert

Related Devices

The devices to record and display. For more details, see step 8 above.

Duration Select the duration for which recording and displaying should be

performed.

Quality The picture quality (1-8).

Low bandwidth Low/regular bandwidth: The compression level and number of FPS are

affected by this setting.

Mode The refresh mode (Normal/Full).

FPS Frames Per Second: The rate at which the video is recorded.

PTZ Presets and auxiliary for a PTZ camera.

All presets (created in the PTZ control of a specific camera) are

available via a macro. The Preset number represents a fixed location

and zoom point in the video display, meaning a specific location to

which the camera will point. The Auxiliary number indicates the camera

mode required for its own setup/calibration.

In both cases the user defines a Preset and/or Auxiliary number.

Expanded Display

Mode

Expands the current video display to fit the entire screen.

Record & Display

For more details

about the Record

& Display

command settings,

see the preceding

procedure.

Destination Storage Selects the transmitter (storage location) to which to record the live

video/audio when the macro is activated.