Vicon IX 2000 L Manual de usuario descargar pdf (Pagina 168)

RAIDWatch User’s Manual

Figure 9-4: List of LDs

From the list shown in Figure 9-4, select the LD for which you wish to change its

characteristics or configure. Once this LD has been selected, its members will

appear in the Front View sub-window. At the top of the Functions window, three

tabs (Properties, Add Disk and Expand) will appear.

9.2.3.1. Modifying LD Configurations

After the LD is created, some configurations can be modified in the Properties

command page. To access the page, select a logical drive and click on the

Properties tab under Functions window.

Figure 9-5: The Add Drive Command Sub-window

Each option is executed by a two-step procedure. Click to select a desired value

from the pull-down menu or input a name, and then click

Apply for the

configuration to take effect.

Write Policy: Write policy can be adjusted on a per logical drive basis. This

option allows you to set a write policy for the specific logical drive you selected.

“Default” is a neutral value that is coordinated with the controller’s caching mode

setting. Other choices are “Write-back” and “Write-through.”

Name: You can name a logical drive per logical drive basis.

LD Assignment: both controllers can access a logical drive. In tradition

to LD management, one LD can only be accessed by primary or

secondary controller.

9-8 Logical Drive Management

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 251 252

Sin comentarios

Vicon IX 2000 L Manual de usuario Pagina 168