Vicon IX 2000 L Manual de usuario descargar pdf (Pagina 80)

RAIDWatch User’s Manual

Figure 4-35: Add Broadcast Receiver Dialog Box

Step 4. Select the severity level of events to be sent to the receiver

station.

Step 5. Repeat this process to add more receivers.

NOTE:

NETBUES and TCP/IP should be active services on your Centralized

Management station for message broadcasting.

Sender Side

From the Module Config window:

Step 1. Find the Broadcast settings from the pull-down list.

Step 2. Click on the On/Off switch beside the pull-down button to enable

LAN broadcast notification.

Switched ON Switched OFF

Step 3. Double-click on the Current Value field of the Status row to

enable LAN broadcast. Set Status to Enable if you want the

module to be activated every time the Root Agent is started. Note

that the On/Off switch should also be in the On position before

you turn off the server or close the utility. Otherwise, you will

have to manually enable the function whenever you reboot the

server.

Step 4. Select the severity level of events to be sent to the receiver

station.

4-20 Event Notification Settings

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 251 252

Sin comentarios

Vicon IX 2000 L Manual de usuario Pagina 80