Vicon IX 2000 L Manual de usuario descargar pdf (Pagina 184)

RAIDWatch User’s Manual

Figure 9-21: Logical Volume Parameters

Step 3. Available expansion size displays in a text box if there is any

amount of unused capacity.

Step 4. Click the Expand button at the bottom of the configuration panel.

The expand process should be completed in a short while because

all unused capacity in the members of a logical volume must be

made useful by the same expansion process. The expansion

process on a logical volume simply lets subsystem firmware

recognize the change in the arrangement of free capacity.

NOTE:

You may combine partitions under View and Edit LV Partition Table

by expanding the size of earlier partitions (such as increasing the size

of partition 0 so that it is as large as all partitions combined to make

one partition).

WARNING!

Combining partitions destroys existing data on all drive partitions.

Step 5. The logical volume will now have a new last partition the same

size as the expansion. Right-click the expanded volume and

select the Edit Partition command to look at the partition verify

this.

9.3.4 Deleting an LV

Step 1. Select the configured volume you wish to remove with a single

mouse-click. Right-click the adjacent area to display a command

menu. As shown in Figure 9-22, all the LVs that have been

created will appear below the Logical Volume Status panel.

9-24 Logical Volume Management

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 251 252

Sin comentarios

Vicon IX 2000 L Manual de usuario Pagina 184