Vicon Roughneck V920D Series Guía de instalación descargar pdf (Pagina 13)

Installation Options

5. Fasten the base to the wall or ceiling with the appropriate hardware for the mounting surface, lag

bolts and sleeve for cement surfaces or machine screws for other surfaces.M6x35 tapping screws

are supplied for use, if suitable. A rubber washer is provided for each mounting hole for

environmental sealing. If the rear cable access is used, be sure that holes are aligned correctly so

the cable is routed to allow a flush installation of the base. As a mounting alternative, align the

mounting holes with a 4 x 4 electrical box and fasten the base to the box with machine screws.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 81 82

Sin comentarios

Vicon Roughneck V920D Series Guía de instalación Pagina 13