Vicon Roughneck V920D Series Guía de instalación descargar pdf (Pagina 49)

• HTTP Server Setting

- URL: The network address to the server and the script that will handle the request.

For example:

http://192.168.12.244/cgi-bin/upload.cgi

- Port: Select the port number. The default is 80.

- User name/Password: Provide your log-in information.

• HTTP Server Test

When the setup is complete, the connection can be tested by clicking the Test button.

When the settings are complete, click Save, or click Reset to revert to previously saved settings.

 Alarm Out

When the network camera detects an event, it can control external equipment connected to its alarm

output port.

- Enable: Select “Enable alarm out” and the output will be activated for as long as the event is

active. Select a Type of NO or NC (Normally Open or Normally Closed).

When the settings are complete, click Save, or click Reset to revert to previously saved settings.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 81 82

Sin comentarios

Vicon Roughneck V920D Series Guía de instalación Pagina 49