Vicon Roughneck V920D Series Guía de instalación descargar pdf (Pagina 24)

3.5 Network Camera Setup

This section describes how to configure the network camera and is intended for product

Administrators, who have unrestricted access to all the Setup tools, and Operators, who have access

to the settings for Basic, Live View, Video & Image, Audio, Event, and System Configuration.

The network camera is configured by clicking Setup in the top right-hand corner of the Live View page.

Click on this page to access the online help that explains the setup tools.

When accessing the network camera for the first time, the

“Admin Password” dialog appears. Enter your admin name

and password, set by the administrator.

Note: If the password is lost, the network camera must be

reset to the factory default settings. See section “3.8

Resetting to the Factory Default Settings”. The default

administrator username is “ADMIN” and password is “1234”.

3.5.1 Basic Configuration

The device information is displayed on this Basic Configuration page.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 81 82

Sin comentarios

Vicon Roughneck V920D Series Guía de instalación Pagina 24