Vicon S10-CH Mini Especificaciones descargar pdf (Pagina 12)

6 • Programming Menus XX134-44-02 Rev 710 SurveyorVFT Camera Dome Programming

These menu settings do not affect the camera speed when acquiring a preset

target. Presets are solved at the fastest possible speed regardless of the

maximum manual speed selected. Default setting for pan speed is 100° per

second, while tilt speed is 90° per second.

The System Settings menu also allows the user to enable or disable Zoom

Scalable Pan/Tilt. When enabled, this feature adjusts the pan and tilt speed

relative to the amount of magnification provided. When the camera is zoomed in

on a subject, the speed is slowed down to compensate for the size of the image.

This allows a finer range of motion when looking at close-up subjects. The default

is enabled.

The System Settings menu includes a compass feature. The compass feature

provides a directional title display, a 0-360º pan reading display and a -2.5º to

92.5º tilt reading display in the format North 312/35. This feature allows an

operator to program and utilize a continuous absolute pan and tilt display reading.

To set true North position (Zero Compass):

1. At the camera dome, verify that the camera’s approximate North position

can be viewed and locally panned with a keypad.

2. Using a compass or any other positioning device as a reference, position

the dome’s camera until it is facing true North.

3. Press the A/P key to set this position.

4. The compass title should display N 360/X. N is North, 360º is the true

North setting and X is a fixed null tilt position.

The PTZ Timeout feature, when enabled, allows the unit to timeout if manual pan,

tilt or zoom is active for a programmable amount of time up to 255 seconds. This

feature allows you to select an Action, Stop or Preset, when it occurs. When this

occurs, a message displays for 2 seconds. This will not occur if autopanning or

any automatic function is active.

The Address Setting allows overriding the DIP switch address. When the

address is changed, the dome will reset. Installing factory defaults will not reset

the override address. To disable the override feature either set the dome for

Vicoax or call up the current address and disable it.

On the 23X/35X (day/night) camera, there is an Image Flip option that can be

enabled or disabled. This is used when mounting the dome in an inverted position.

When enabled, be aware that certain functions are reversed to compensate for the

image flip.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Sin comentarios

Vicon S10-CH Mini Especificaciones Pagina 12