Vicon S10-CH Mini Especificaciones descargar pdf (Pagina 20)

14 • Programming Menus XX134-44-02 Rev 710 SurveyorVFT Camera Dome Programming

The Digital Zoom Mode screen allows the digital

zoom feature on the SurveyorVFT to be disabled

(default setting is enabled). When the Zoom In button

is held, the lens magnifies the image to the limit of the

22:1, 23:1 or 35:1 optical zoom, depending on the

camera type. Releasing the button and pressing it will

enable infinitely variable digital magnification of the

image.

With digital zoom, the user has the effect of a 264:1, 276:1 or 420:1 lens. Digital magnification, however, cannot

add any resolution to the picture. With each increase in the digital magnification, the picture gets noisier and loses

clarity. Disabling the digital zoom prevents the user from going into a “digitally enhanced” mode in applications

where it is not desirable.

The Video Defaults menu sets all the camera video settings to the default settings

without affecting other functions, such as presets and tours. Image Stabilization,

Sector settings and Privacy Masks are also unaffected. Setting the Video Defaults

will cause the dome to reboot.

Video Defaults affect the following camera controls:

Function Default Setting

Wide Dynamic Range Off

Backlight Compensation (BLC) On

Iris Level Autoiris

Shutter Speed Automatic

Automatic Gain Control (AGC) On

White Balance Automatic

V-Phase (synchronization) Internal

Aperture Adjust Automatic

Focus Mode Auto

Autoiris Adjust from Keypad Off

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 41 42

Sin comentarios

Vicon S10-CH Mini Especificaciones Pagina 20