Vicon S10-CH Mini Especificaciones Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 42
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
XX134-44-02 Rev 710 SurveyorVFT Camera Dome Programming Programming Menus 25
Install Defaults
Finally, the Install Defaults option restores all SurveyorVFT settings to their
factory defaults, including the Video Defaults. This affects all programmed
functions, including presets and tour settings. The table below shows the main
default settings; some defaults are camera dependent. When programming, keep
a record of settings as a reference if for any reason the unit must return to factory
defaults.
Function Default Setting
Max. Manual Pan Speed 100°
Max. Manual Tilt Speed 90°
Zoom Scalable Pan/Tilt Enabled
Focus Mode Auto
Shutter Speed Automatic
Backlight Compensation (BLC) Enabled
Aperture Adjust Automatic
White Balance Automatic
Wide Dynamic Range Off (Disabled)
Iris Autoiris
Automatic Gain Control (AGC) On (Enabled)
Autoiris Adjust from Keypad Off (Disabled)
V-Phase (synchronization) Internal
Image Stabilization Off (Disabled)
Enable/Disable Input (Alarms) No (Disabled)
Enable Report to CPU (Alarms) No (Disabled)
Active Alarm State Low
Acknowledge Mode Manual
Set Actions No Action
Reset Actions No Action
Sector Censoring Enabled
Digital Zoom Mode Enabled
All Titles All Disabled
Title Fade Control Disabled, 1 sec
Enable Camera, Alarm, Preset, Lens Status Title Text Enabled
Enable Sector, Aux Function, Time, Date, Compass
Azimuth Title Text
Disabled
Text Size NTSC: line 1-1X, line 2-2X; PAL: line 1-2X, line 2, 3X
Language English
Relay Power On State Off
Output Type Latching
Time Display Format 12 hour
Daylight Saving Time Manual
Date Format MM/DD/YY
Privacy Mask Zoom Level 1.0X
Main Programming Defaults Common to All Cameras (some defaults are camera dependent)
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Comentarios a estos manuales

Sin comentarios