Vicon IX 2000 L Información técnica descargar pdf (Pagina 92)

MX Ultranet

9-8 Vicon MX Hardware System Reference

primary MX Ultranet, but the position indicator will also function

correctly for a lesser number of secondary MX Ultranet units.

Figure 9-3: MX Ultranet Position Switch settings and Position Status lights

As illustrated, the Position Switch must be set to the left on the

primary MX Ultranet and to the right on each secondary MX Ultranet

in order to enable the Vicon software to identify cameras connected

to MX Ultranet units.

On the primary MX Ultranet, the Position Status light is lit next to

all four Connect sockets. On each secondary MX Ultranet, the

Position Status light is lit for the Connect socket corresponding to

the primary MX Ultranet socket to which this unit is connected. This

is regardless of which of the four Connect sockets is used on this

secondary MX Ultranet.

Important

If you do not explicitly configure the Position Switch on each MX Ultranet,

the Position Status lights may be lit, but their status will not necessarily

have the defined meaning.

MXhardware_Reference.book Page 8 Monday, April 30, 2007 1:56 PM

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 255 256

Sin comentarios

Vicon IX 2000 L Información técnica Pagina 92